Killowen Natural Sample

Application Instructions:
Step 1: Sand the wood surface- Ensure a smooth, clean and dry surface. Remove imperfections and flaws
Step 2: Measure and mix the appropriate amounts of Killowen Natural (Part A) and Hardener (Part B). The ratio is 10:1. Pot life once mixed is 5-6 hours based on conditions.
Step 3: Apply the mixture using a air-assisted airless, conventional, pressure pot or cup gun for spraying, or a high quality brush or roller. Apply a thin layer and consistent layer.
Step 4: Allow for appropirate dry time, up to 4 hours depending on conditions. Light sand your project with a finer grit sand paper or sponge. Follow the grain as much as possible
Step 5: Applya final coat using the previously chosen method. Allow to dry 4 hours before stacking and handling.

Drying Time:
90 minutes in ideal conditions. Can take up to 4 hours to properly dry.

Coverage Per Gallon:
Covers approximately 200-250 square feet per gallon depending on wood porosity and condition

Finish Type:
Natural matte finish, ideal for enhancing wood grain.

Ingredients:
Water-based, low-VOC formulation for an eco-friendly wood finish.

Best Used For:
Perfect for wooden furniture, cabinetry, box beams, and interior doors.

Storage:
Store in a cool, dry place. Keep in area above 45 F Keep the container tightly closed when not in use.

Safety:
Non-toxic, low-VOC, safe for indoor use. Keep out of reach of children.

Shelf Life:
Up to 1 year when stored properly.